Nissan Tiida C11 2006- MSG

EPS Motor/Sensor Gear for Nissan Tiida C11 2006-

If the steering on your Nissan Tiida C11 2006- has become heavy, noisy, or unresponsive, the EPS motor is likely the culprit and should be replaced promptly.

During the 2006-present manufacturing period, the Nissan Tiida C11 2006- underwent several mid-cycle updates that affected the steering system. This EPS motor (OE: 48001-ED500) is validated for the versions produced within this range. Checking the build date on your vehicle's door jamb sticker can help confirm you are ordering the correct part.

This EPS motor is compatible with the following OE reference numbers:

• 48001-ED500
• 48001-ED51A
• 48001EW700
• 48001-2FJ0A
• 48001-ED500
• 48001-EM30B
• 48001-EM02A
• 48001-EM02B

Technical Data

Compatible Vehicles

This EPS motor is designed for the following application:

• Nissan Tiida C11 2006- (2006-present) — LHD configuration

To confirm this is the correct part for your Nissan Tiida C11 2006-, verify that the OE number on your existing EPS motor matches 48001-ED500. This number is typically stamped on a metal tag attached to the housing or engraved directly into the component body.

Note: Nissan Tiida C11 2006- vehicles produced in different markets may use different steering system configurations. Always cross-reference the OE number for guaranteed fitment.

Common Failure Symptoms

Steering problems on the Nissan Tiida C11 2006- can range from subtle to alarming. If you notice any of the following, have the EPS motor inspected right away:

• Uneven tire wear: The front tires on the Nissan Tiida C11 2006- show accelerated wear on one edge, a telltale sign that the toe angle is off due to steering rack play.
• Fluid leaks: Reddish or brown power steering fluid pooling under the front of the vehicle, usually near the driver-side wheel well. On the Nissan Tiida C11 2006-, leaks commonly originate from the rack end seals where the inner tie rods connect.
• Steering wheel play: The steering wheel develops noticeable free play before the wheels respond. On the Nissan Tiida C11 2006-, this often appears first at highway speeds, where small corrections become imprecise and the car may wander within the lane.
• Steering wheel vibration: Vibration felt through the steering column, often worsening at specific speeds. On the Nissan Tiida C11 2006-, this can be mistaken for wheel balance issues but actually originates from a worn rack.
• Vehicle pulling to one side: Even after a wheel alignment, the Nissan Tiida C11 2006- drifts left or right, suggesting uneven internal resistance in the steering rack assembly.

If your Nissan Tiida C11 2006- exhibits any combination of these symptoms, have the EPS motor inspected by a qualified mechanic. Continuing to drive with a compromised steering system risks further damage and poses a serious safety hazard.

Shipping and Ordering Information

KITLAMT ships Nissan Tiida C11 2006- EPS motor units worldwide from our warehouse in Guangzhou, China. Here is what you need to know about ordering and delivery:

• Stock availability: This OE reference (48001-ED500) is maintained in our regular inventory. Orders placed before 2:00 PM China time on business days typically ship the same day.
• Express shipping: DHL, FedEx, and UPS express options deliver to most countries within 5-10 business days. Real-time tracking is provided for all express shipments.
• Economy shipping: For larger orders, sea freight is available at significantly lower cost. Delivery times range from 20-35 days depending on the destination port.
• Packaging: Each Nissan Tiida C11 2006- EPS motor is packed in a reinforced cardboard box with foam inserts to prevent damage during transit. Custom packaging with your brand name is available for orders of 50+ units.
• Payment methods: We accept T/T (bank transfer), Western Union, PayPal (for sample orders), and trade assurance through Alibaba. Credit terms are available for established business customers.
• Sample orders: Need to verify quality before committing to a bulk order? We offer sample units of the Nissan Tiida C11 2006- EPS motor at a small premium, with the price difference refunded on your first bulk order.

For pricing inquiries or to place an order for the Nissan Tiida C11 2006- EPS motor, contact our sales team at sales@kitlamtparts.com or use the inquiry form on our website. We respond to all inquiries within 12 hours during business days.

Why Choose KITLAMT for Your Nissan Tiida C11 2006-

KITLAMT's advantage for the Nissan Tiida C11 2006- EPS motor comes down to three things: consistent quality, competitive pricing, and reliable stock availability. We maintain a rolling inventory of the most popular OE references, which means your order typically ships within 1-3 business days.

• OE-specification manufacturing — every EPS motor matches the original Nissan Tiida C11 2006- unit in fit and function
• 12-month warranty — comprehensive coverage against manufacturing defects
• Global shipping — express delivery to 200+ countries via DHL, FedEx, and UPS
• Technical support — our team can help verify compatibility and troubleshoot installation issues
• Competitive pricing — direct from manufacturer pricing with no middleman markup

Installation Guide

The Nissan Tiida C11 2006- EPS motor replacement procedure requires lifting the vehicle, working underneath, and handling hydraulic fluid. Proper safety equipment and a workshop environment are essential.

1. Step 1: Lift the front of the Nissan Tiida C11 2006- and secure it on jack stands. Remove both front wheels to access the steering components.
2. Step 2: Disconnect the outer tie rod ends from the steering knuckles using a tie rod separator. Mark the position of the tie rods on the old rack to help with alignment later.
3. Step 3: Place a drain pan beneath the steering rack area. Disconnect the high-pressure and return hydraulic lines from the rack. Be prepared for power steering fluid to drain.
4. Step 4: Remove the mounting bolts securing the steering rack to the subframe. On the Nissan Tiida C11 2006-, there are typically 2-4 bolts accessible from underneath.
5. Step 5: Carefully maneuver the old steering rack out through the wheel well or subframe opening. On some Nissan Tiida C11 2006- variants, you may need to slightly lower the subframe on one side for clearance.
6. Step 6: Transfer the inner tie rods and boots from the old rack to the new KITLAMT unit if they are not pre-installed. Ensure the boots are properly seated to prevent contamination.
7. Step 7: Install the new KITLAMT EPS motor in the reverse order of removal. Torque all mounting bolts to the manufacturer's specification.
8. Step 8: Reconnect the hydraulic lines using new O-rings. Fill the power steering reservoir with the recommended fluid for the Nissan Tiida C11 2006-.
9. Step 9: Bleed the system by turning the steering wheel lock-to-lock with the engine running, checking for leaks at each connection point.
10. Step 10: A four-wheel alignment is mandatory after replacing the EPS motor on the Nissan Tiida C11 2006-. This ensures proper toe settings and prevents premature tire wear.

Important: After installing the new EPS motor on your Nissan Tiida C11 2006-, always perform a four-wheel alignment and verify there are no fluid leaks before driving the vehicle on public roads.

Frequently Asked Questions

Q: Will this EPS motor fit my Nissan Tiida C11 2006- exactly?

A: Yes, this EPS motor is designed as a direct bolt-on replacement for the Nissan Tiida C11 2006- (2006-present). It matches OE reference 48001-ED500 in all critical dimensions including mounting points, spline count, thread pitch, and overall length. No modifications or adapters are needed for installation.

Q: How does KITLAMT quality compare to the original Nissan part?

A: KITLAMT EPS motor units are manufactured to the same dimensional tolerances and material specifications as the original equipment. We use equivalent-grade alloy steel, the same seal specifications, and pressure-test every unit before shipping. The main difference is the price — KITLAMT parts are typically 40-60% less expensive than dealer parts.

Q: What warranty comes with this EPS motor?

A: Every KITLAMT EPS motor is covered by a 12-month warranty against manufacturing defects. If the part fails under normal use within the warranty period, we will ship a replacement at no charge. Warranty claims are processed within 48 hours of notification.

Q: Can I install this EPS motor myself on my Nissan Tiida C11 2006-?

A: While experienced home mechanics with a full tool set can complete this job, we strongly recommend professional installation. The Nissan Tiida C11 2006-'s steering system is a safety-critical assembly, and improper installation can result in dangerous driving conditions. A wheel alignment is also required after installation, which requires professional equipment.

Q: How long will this EPS motor last on my Nissan Tiida C11 2006-?

A: Under normal driving conditions, a KITLAMT EPS motor on the Nissan Tiida C11 2006- should last 100,000-150,000 kilometers or more. Longevity depends on driving habits, road conditions, and whether the steering boots are kept in good condition. Avoiding full-lock steering hold and maintaining proper fluid levels will maximize lifespan.

Related Products

Explore other steering components available from KITLAMT:

• MItsubishi Pajero V73 2000- Hydraulic Power Steering Rack
• Nissan MAXIMA QX A33 Hydraulic Power Steering Rack
• Nissan X-Trail 2001- Hydraulic Power Steering Rack

Browse our full catalog of steering components for Nissan vehicles and other popular brands at kitlamtparts.com.

For pricing, availability, or technical questions about this EPS motor for the Nissan Tiida C11 2006- (48001-ED500), contact us at sales@kitlamtparts.com. KITLAMT — your trusted source for premium steering components since 2009.